EFRP-P2A50 2u 1500w 1+1 redundant power supply features: 2u form factor 1500w with atx outputs 80plus? platinum level efficiency (power module) pmbus 1.2 support n+1 redundancy / load sharing 0~40 working temperature general specification input range : 110 to 240 vac, +/10% power factor: > 0.95 minimum efficiency: 94% at 230v output,50% load (power mod ule) hold up time: 16ms @ 70% load short circuit protection over current protection over voltage protection no load operation mtbf >100,000 hours@25 operating temperature: 0 to 40 operating humidity: 20 to 90 % emi/rfi: ce, fcc class a safety: ul, tuv, ccc, cb input and output characteristics input output voltage frequency current load +3.3v +5v +12v 12v +5vsb 110~240vac 47~63hz 10~7.8a max.load 24a 70a 79a (110vac input) 125a (220vac input) 0.5a 3.5a min.load 0a 0a 0.5a 0a 0.1a notes: 1: total combined output power shall not exceed 950 w at 110vac input 2: total combined output power shall not exceed 150 0w at 220vac input 3. 3.3v+5v combined load shall not exceed 300w ripple and noise output +3.3v +5v +12v 12v 5vsb load regulation 5% 5% 5% 5% 5% line regulation 1% 1% 1% 1% 1% ripple & noise 60mv 60mv 120mv 130mv 60mv
mechanical outline drawing outline dimension: 101.8x84x349.9(mm) ?etasis electronic corporation. all rights reserved . etasis electronics corporation reserves the right to make changes to their products, specification, or to discontinue any prod uct and its service at anytime without notice. the information and specification from etasis is believed to be accurate and reliable. how ever, etasis assumes no responsibility for any busi ness loss due to specification changes. etasis products are not designed to be use d in system deemed to be critical, or in any system wherein failure or malfunction could result in injury or death.
|
